Valid product registration or software purchase required to use CustomTone.

TONE NAME: WET DRY WET

  • Created with: HX Effects
  • Author:
  • Guitarist:
    Van Halen, Zakk Wylde
  • Style:
    Hard Rock
  • Date: 10/20/23
  • Downloads: 218
  • Addons:

    Model Packs increase the number of Amp or FX Models of a GuitarPort, TonePort, PODxt, PODxt Live or PODxt Pro, for a wider variety of tone possibilities. When a particular tone in the library relies on a Model available in one of these packs, you'll see symbol(s) to indicate which Packs: MS (Metal Shop), CC (Classics Collection), FX (FX Junkie), and PP (Power Pack).

    The models within the FX Junkie Model Pack are already included in PODxt Live, and offered for purchase to add-on to GuitarPort, TonePort, PODxt and PODxt Pro.

    Variax is the uniquely flexibile guitar from Line 6. Our Vetta II amplifier includes a digital connection for the Variax that lets you store settings for both your amp and your guitar in the Vetta II so that when you call up a Vetta Channel Memory your amp and guitar can change sounds together. Vetta II Tones marked with this guitar symbol include this Variax data.

    For each tone in the library, you'll see an icon for either a single coil or humbucker pickup. This tells you whether the tone is best for use with a single coil pickup or a humbucker, so you can select the appropriate pickup on your guitar when using this tone.

    Attention POD 2.0, Flextone and HD147 owners... Your hardware doesn't do Stomp effects, so you'll hear something different than what was intended. Try increasing the Drive or choose a higher gain Amp Model to get the right sound. The other aspects of the sound should translate as expected, so you'll at least get a great starting place for tweaking.

  • Comments:
    This is my Wet Dry Wet setup. I use my studio monitors, but you can also use powered speakers or amps. Use either the send of your FX loop or the pre-amp out of your amp, and plug it into the input of the HX FX. This makes your amp the "Dry" signal. Plug one monitor into the send 1 and the other into the output (mono). This creates your "Wet" signals. You will need an IR with this set up if you use monitors, or it WONT sound right! Enjoy. Thanks to synsin, I used his 90's settings from the HELIX Check it out (EVH Wet/Dry/Wet)

Tone successfully deleted

 
Delete this tone forever?

Yes / No
There was a problem deleting the tone.

Close

Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.