Legacy Products

X2 XDR955

X2 XDR955 are no longer made.

Please check out these replacement products:

X2™ XDR955 Overall System Specifications
  • Transmission Format: Line 6 proprietary digital audio transmission
  • A/D-D/A Conversion: 24-bit delta sigma, 128 times oversampling
  • Frequency Response: 10 Hz - 20 kHz
  • Audio Dynamic Range: > 115 dB
  • Distortion: 0.03% THD
  • RF Carrier Frequency: 902 MHz to 928 MHz, FSK, dual frequency transmission
  • Compatible Channels: Five
  • RF Output Power: 15mw
  • Audio Output Level: Unity gain with transmitter input
  • Polarity: Positive voltage at input yeilds positive voltage at output
  • Transmission Range: ~300 feet line-of-sight (may vary due to local conditions)
  • FCC Approval: Part 15 approved, no user-license required
  • Operating Temperature Range: –18° to +57° C (0° to +135° F)
XDR4 Receiver Specifications
  • Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
  • Connectors: 1/4-inch unbalanced TRS output 1.8K-ohm impedance (tip= instrument voicing, ring= full bandwidth, sleeve= ground) XLR Balanced 600 ohm
  • LED Display: Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
  • Controls: Power On/Off, Channel Up and Down
  • Dimensions (WxHxD): 1 3/4 inches W x 16 2/10 inches D x 7 1/2 inches H
  • Power Requirements: Includes AC/DC adapter (9V DC 500mA)
  • Weight: 2.5 lbs (with rack hardware and antennas installed)
  • Housing: Polycarbonate, impact tested to 300 lbs.
XDH4 Transmitter Microphone Specifications
  • Controls: Power, Select
  • LCD Readout: Backlit, custom function
  • Dimensions: 6 1/4 inches x 1 1/2 inches (15.875 x 3.81 cm) without capsule
  • Battery Life: Switching power supply, ~8 hours (2x AA alkaline)
  • Weight: 12 1/2 oz. (with 2x AA batteries installed)
  • Housing: Polycarbonate, impact-tested to 300 lbs.
  • Microphone Type: Premium moving-coil dynamic
  • Pattern: Cardioid
  • Frequency Response: 50 Hz – 18 kHz
  • Sensitivity: 2.5 mV/PA
  • Maximum SPL: 144 dB
Download Wireless Microphone White Paper