HELIX



Helix | Matteo Mancuso | Artist Tone Walkthrough
Matteo Mancuso’s feel for music paired with his unique fingerstyle and outstanding technique has struck a chord with guitarists worldwide. In this video, Matteo plays his Revstar Custom Model with 2 Lollar Imperial humbuckers built explicitly for his needs. Matteo takes us through his “Mancuso Sounds” Helix amp and effects preset featuring four snapshots: a dark jazz tone, bright chorus clean, crunch, and a warm leam lead tone that he uses in his live trio performances. Download the free Helix Artist Tone Collection preset here: https://line6.com/customtone/tone/5640400/


Helix | Sean Murray | Artist Tone Walkthrough
Producer and Musical Director Sean Murray walks through his Helix Artist Preset. The tone features two signal chain that delivers a pristine clean tone and crunchy lead. In this video, Sean explores his block selection with HX Edit. Watch an exclusive performance and download this Helix Preset here: https://line6.com/helix-artist-tone-c... Download this preset here: https://line6.com/customtone/tone/5612181/c...


Helix | Ludovic Briand | Artist Tone Walkthrough
Composer and session guitarist Ludovic Briand explains how his 'Ludovic LB' Helix Preset uses four snapshots to give him 'all the basics' with two amp blocks hooked up to a channel selector and a selection of effects. Download this preset here: https://line6.com/helix-artist-tone-c...


Helix | Massimiliano Cona | Artist Tone Walkthrough
Songwriter, composer, and session guitarist Massimiliano Cona breaks down his Helix amp and effects processor preset that he designed for his original composition, "Mother." He created this preset using two effects chains split between left and right, set with snapshots that allow him to change his sound easily throughout his performance. Additionally, there is a looper set in the middle to help orchestrate this performance. Download this preset here: https://line6.com/customtone/tone/5599627/


Helix | Tommy Kristiansen | Artist Tone Walkthrough
Singer-songwriter and guitarist Tommy Kristiansen describes how he built his 'BLUESY TONE - TK' Helix amp effects processor preset to create a simple but effective inspiring blues tone. Using snapshots within this preset, you can select a clean or a grittier lead sound with slight changes to the effects chain including adjustments to the overdrive, reverb, and compressor. Download this preset here: https://line6.com/customtone/tone/5587131/


Helix | Pi Stoffers | Artist Tone Walkthrough
Songwriter and audio engineer Pi Stoffers take us through how he created his 'LINE 777 LOTL' Helix Preset. His signal chain features a phaser, overdrive, two poly pitch shifters, all placed before the mighty 'Das Benzin Lead' amp. Download this preset here: https://line6.com/customtone/tone/5573650/


Helix | Andy Martongelli | Artist Tone Walkthrough
Throughout his career, Line 6 artist, songwriter, producer, and guitar teacher Andy Martongelli has been featured on several rock/metal recordings. In this video, he walks us through his “AM Spiral Motion” Helix amp and effects processor preset, explains his signal chain used to create his dark rock/metal sound including his favorite distortion pedals in the Helix, and how he uses modulation to push his tone into new dark depths. Download this preset and watch an exclusive performance here: https://line6.com/customtone/tone/5559288/


Helix | John Cordy | Artist Tone Walkthrough
Musician and YouTube Creator John Cordy takes us through the choices he made while creating his 'JOHNNATHANCORDY' Helix preset for our Helix Artist Tone Collection. In this preset you will find, a slice of ambience in the form of a sparkling clean sound with the addition of the glitch delay and John shares his go-to lead sound. Download this free preset here: https://line6.com/customtone/tone/5545579/


Helix | Unai Iker | Artist Tone Walkthrough
Content creator, clinician and all-around player Unai Iker created his 'Funkey-Munkey-UI' preset with fun in mind. Not only does it sound great, but it's packed with eight snapshots full of different sounds to experiment with. Download this free preset here: https://line6.com/customtone/tone/5532847/


Helix | Andreas Rydman | Artist Tone Walkthrough
Musician, producer, and owner of the 'Guitar Geeks' Podcast, Andreas Rydman walks us through his 'RYDMAN 2' Helix Preset for our Helix Artist Tone Collection. The core of his preset is the ' Brit J45 brt' set on the edge of breaking up so you can ride your volume knob from clean to distortion based on personal preference. Using the four snapshots allows you to bring even more sounds to this dynamic preset. Download this free preset here: https://line6.com/customtone/tone/5517448/


Helix | Dee Dammers | Artist Tone Walkthrough
Dee Dammers walks us through his 'DEEMAN-DD' Helix amp and effects processor preset with a great all-in-one rhythm & lead sound for the Helix Artist Tone Collection. Dammers uses the Snap/Stomp mode on his Helix Floor to easily transition between the different elements of his chain using his feet, making this a great preset for playing live! Download this free preset here: https://line6.com/customtone/tone/5505099/


Helix | David Palau | Artist Tone Walkthrough
Line 6 artist David Palau breaks down his '80s World-DP' preset for the Helix Artist Tone Collection and walks us through all 8 Snapshots that can be used to find sounds big enough to fill a stadium. Download this free preset here: https://line6.com/customtone/tone/5466953/

LEARNING WITH LINE 6

HELIX



Learning with Line 6 | Helix - Feel Controls
Join us for episode three in which Tony Camponovo will focus on Helix - Feel Controls.
Tony will be having a look at...
- Sag
- Hum
- Ripple
- Bias
- Bias X and how these parameters can shape your overall guitar sound.


Learning with Line 6 | Helix - Back to Basics
Join us for episode five in which Ross Bailey will go 'Back to Basics' with Helix! Ross will be covering...
- Where to start when building a preset
- Amp choices
- Stock cab vs IR
- When to add effects, and where to put them


Learning with Line 6 | Helix - Common Signal Flow Order and Parallel Paths
Join us for episode six in which Nick Bell will focus on Helix - Common Signal Flow Order and Parallel Paths.


Learning with Line 6 | Helix - Four Cable Method
Join us for episode seven in which Tony Camponovo will be covering the “four cable method”, which involves using Helix in conjunction with a traditional amp’s effects loop

Tony will go through the correct routing for this setup and discuss exactly what it does. He'll also show different pre-amps within Helix and how they will color the tone of the traditional amp.


Learning with Line 6 | Helix - Snapshots
Join us for episode nine in which Nick Bell will be focusing on Snapshots.
Nick will cover...
- What Snapshots are and what they control
- Snapshot Block Bypass - Snapshot Edit Behavior
- Snapshot Reselect


Learning with Line 6 | Using Compressors in a Helix Preset
Join us for episode ten in which Tony Camponovo will be talking about running two compressors on a Helix preset, demonstrating…
- His favorite compressors
- How to order them
- How to adjust the settings


Learning with Line 6 | Using Compressors in a Helix Preset
Join us for episode ten in which Tony Camponovo will be talking about running two compressors on a Helix preset, demonstrating…
- His favorite compressors
- How to order them
- How to adjust the settings


Learning with Line 6 | Snapshots
Join us for episode twelve in which Tony Camponovo will cover snapshots, including “snapshot bypass.”


Learning with Line 6 | Artist Tone - Andy Timmons
Join us for episode thirteen in which Ross Bailey will cover...
- Andy Timmons' rig, new and old
- Recreating the tone
- Using dynamics to get the most out of it


Learning with Line 6 | Serial vs Parallel Signal Paths & Split Options
Join us for episode fourteen, 'Serial vs Parallel Signal Paths & Split Options', in which Nick Bell will cover...
- The difference between serial and parallel signal flows
- The benefits of using parallel signal paths
- Parallel Split Options


Learning with Line 6 | Tony Camponovo Custom Tone
Join us for episode fifteen in which Tony Camponovo will go through one of his own custom tones, covering...
- The amp/amps that he is using
- Which effects he is using and how they are set
Tony will also post the tone to Line 6 Custom Tone for you to download. https://line6.com/customtone/


Learning with Line 6 | Tony Camponovo Custom Tone
Join us for episode seventeen in which Tony Camponovo will go through one of his own custom tones, using the “Poly Pitch” effect to create a synth sound for a guitar
Tony will also post the tone to Line 6 Custom Tone for you to download. https://line6.com/customtone/


Learning with Line 6 | Options when using EQ
Join us for episode 20, 'Options when using EQ' with Ross Bailey.
Ross will cover...
- When and where to use Global EQ
- Choosing which EQ to use
- Where to put in the signal chain
- Useful tricks


Learning with Line 6 | 'FREAKOUT! Tone Template'
Join us for episode 22, 'FREAKOUT! Tone Template' with Nick Bell. Nick will cover how to make any tone feedback (even at low volume) using the Poly Pitch engine and a dynamic split.


Learning with Line 6 | Getting the Most from FRFR
Join us for episode 23, 'Getting the most from FRFR' with Ross Bailey.
Ross will cover...
- What is an FRFR?
- FRFR vs regular speaker cab (tone/ feel)
- Dialing out the fizz/ boom
- How to fit in the mix

HELIX & HX STOMP



Learning with Line 6 | Running Helix/HX into the Front of Your Amp vs. Send & Return
Join us for episode eighteen 'Running Helix or HX into the Front of Your Amp vs. Send & Return' with Ross Bailey.
Ross will cover...
- In front or in the loop? Which one and why?
- Setting it all up
- Cool tricks when using the loop
- Why choose? Have your cake AND eat it!

HELIX & POD GO



Learning with Line 6 | Helix & POD Go - Boosting Solos 101
Join us for episode eleven - 'Helix & POD Go - Boosting Solos 101' with Ross Bailey.
Ross will be covering...
- Boosting basics
- Boosting preamp vs boosting volume
- Clean boost or dirty boost
- Using an EQ for volume boost


Learning with Line 6 | Option Paralysis - Helix Family and POD Go
Join us for episode eight in which Ross Bailey will discuss the subject of option paralysis using Helix, HX, and POD Go, covering...
- Where to start when building a new preset
- Which amp to choose and why
- Choosing which FX blocks
- Knowledge is power
- To copy or not to copy

POD GO



Learning with Line 6 | POD Go Wireless | Preset Leveling & Gain Staging
In episode two, Nick Bell will focus on POD Go Wireless - Preset Leveling & Gain Staging.
Nick will cover...
- Creating a leveling preset
- Level preset volume across multiple presets
- Using multiple distortion blocks and gain staging


Learning with Line 6 | POD Go Wireless - Difference between Drive / Channel and Master Volume
Join Nick Bell as he focuses on POD Go Wireless and the difference between drive/channel and master volume. Nick will be having a look at...
- Tonestack Parameters
- Difference between Ch. Volume and Master Volume parameters
- Drive Ch. interaction with Feel Controls


Learning with Line 6 | POD Go - How 10 Blocks Should Suffice Most Needs
Join us for episode sixteen, 'POD Go - How 10 Blocks Should Suffice Most Needs', with Ross Bailey.
Ross will cover...
- The Rig - you must choose, but choose wisely
- The Tones
- achieving all the things from a few things
- Snapshots
- the part that makes it all easier

HELIX NATIVE



Helix Native Quickstart: Input and Levels Setup
Best practices on how to set up your audio interface input and levels for Helix Native.


Helix Native Quickstart: Processing Power Tips
How to get the most processing power out of a single instance of Helix Native.


Helix Native Quickstart: Using Impulse Responses
How to work with impulse responses to simulate the sound of a mic’d up cabinet within Helix Native. Line 6 offers a pack of IRs called the Allure Pack, and you can download them for free at www.line6.com/allure.

POD GO



POD Go Tone on the Go with Doc Brown
Join Line 6 Product Specialist Doc Brown as he delivers a ‘Tone on the Go’ presentation as part of our ‘Tone Made Easy’ series. Learn the benefits of an easy-to-use guitar processor with best-in-class sound quality, and how to use POD Go to create guitar tones fast – from simple to complex. Doc breaks down the elements of guitar tone, explains the different components that make up tone, talks through the gear artists use to make iconic sounds, and demonstrates how you can recreate these sounds at home with POD Go.

SPIDER V MkII



Spider V MkII: Nailing British Power Rock Tones with Dan Boul
Boutique amp builder Dan Boul explains how he coaxed classic tube-amp tones from the Spider® V 120 MkII in this behind-the-scenes video, accompanied by guitarist Steve Fekete. Why do particular amplifiers sound and behave the way they do? Boul shares his expert knowledge of tube amplifier characteristics, culled from decades of experience with amp design and performance, including 17 years at the helm of 65 Amps.


Spider V MkII: Nailing British Invasion Tones with Dan Boul I Line 6
Boutique amp builder Dan Boul explains how he coaxed classic tube-amp tones from the Spider® V 120 MkII in this behind-the-scenes video, accompanied by guitarist Steve Fekete. Why do particular amplifiers sound and behave the way they do? Boul shares his expert knowledge of tube amplifier characteristics, culled from decades of experience with amp design and performance, including 17 years at the helm of 65 Amps.


Spider V MkII: Nailing Classic American Tones with Dan Boul
Boutique amp builder Dan Boul explains how he coaxed classic tube-amp tones from the Spider® V 120 MkII in this behind-the-scenes video, accompanied by guitarist Steve Fekete. Why do particular amplifiers sound and behave the way they do? Boul shares his expert knowledge of tube amplifier characteristics, culled from decades of experience with amp design and performance, including 17 years at the helm of 65 Amps.

Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.