These forums are read only, please use our new forums here.

Main :: Spider IV/Spider Online



Line 6 Spider 3 full stack?
by silentducks on 2009-07-27 13:36:05

This is a stupid question, but I'm assuming I can make my Spider 3 HD150 half stack into a full stack? Will that increase the power of the amp, and how would I hook that up if I had to Line 6 cabs? I don't quite understand ohms and all of that junk and I definitely don't want to blow anything up, so any help would be GREAT. Thanks!

Gabe



Re: Line 6 Spider 3 full stack?
by AndyParedes on 2009-07-27 16:30:58

Hello,

You would need to have a service center internally modify each cabinet for an 8 or 16 ohm load (depending on the type of cabinet you are using). You would then connect each output of the head to a 16 or 8 ohm connection. See the following link for more info:

Cabinet Connection and Ohm F.A.Q.

http://line6.com/community/docs/DOC-4410



Re: Line 6 Spider 3 full stack?
by heavyonthehead on 2013-01-19 19:28:12

No it will give u a fuller sound fatter sound




The information above may not be current, and you should direct questions to the current forum or review the manual.