silverhead

"Press and hold the VIEW button to enter Setup mode. Change the FSMODE parameter value to FS5-8; it seems like your current setting is ABCD."

"I think the best thing for you to do is to call Line 6 Technical Support (see the Contact Technical Support link under the Support tab at to"

"I have left my X3 Live on all night several times - no issues here."

"You need to connect your speakers to the X3. When connected via usb the X3 becomes your computer's soundcard; your internal soundcard is byp"

"I may be wrong on this but I don't think you can save the global parameters. You can restore them (all) to the default values by using a par"

"When running the Pod through your amp, do you have the Ouput Mode set to LIVE? In the Setup pages, select the Live output mode that most clo"

"I believe Gearbox is no longer available/supported as a plugin; I don't think you will be able to buy/use it. The Plugin processor is Pod Fa"

"To do what you want you will need an audio interface with a sufficient number of inputs. Yes, the UX8 would be great but you don't need a Li"

"1 -  yes 2 -  yes 3 -  no 4 - If you never plan on using the HD amp modelling then you might be better off with an M-series device since"

"You can have more than one physically connected, but the driver may only recognize one at a time. For instance, I doubt that Pod Farm will r"

"Please don't get me wrong - I am not saying that what you are hearing IS the ambient string tone. You are quite convinced that it is not, an"

"The Pod X3 midi implementation is not a full midi implementation. In particular, it does not handle midi notes (on/off or other note command"

"I think jimsreynolds'advice is good - start with the factory presets in the setlist he mentioned to get a look at some suggested setups, the"