Skip navigation
Up to Discussions in FBV MkI / MkII Controllers
851 Views 4 Replies Latest reply: Oct 19, 2011 5:53 AM by Paj-4x4 RSS
Paj-4x4 Just Startin'
Paj-4x4
3 posts since
Dec 27, 2010
Currently Being Moderated

Oct 16, 2011 4:00 AM

FBV to Spider iv 30

I have a Spider iv 30 and an FBV MKII series, i am trying to sync these together as per manual but will not change past step 1.

i have powered on holding the D switch to get step 1 but when moving pedal forward it does not change to 2. With pedal connected the channels do not sound the same as with pedal disconnected. Is the FBV faulty?

Tags: calibration
  • Line6Hugo Line 6
    Line6Hugo
    6,580 posts since
    Apr 8, 2007
    Currently Being Moderated
    Oct 18, 2011 3:52 PM (in response to Paj-4x4)
    RE: FBV to Spider iv 30

    If you are not getting the pedal to switch to '2' in the display, you must not be pressing down hard enough on the toe of the expression pedal.

       

      Please ensure to press hard enough on the toe of the expression pedal (with your foot while standing up) to toggle the toe switch.

       

      Regards,

       

      Line6Hugo

More Like This

  • Retrieving data ...

Bookmarked By (1)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points