FREE SOFTWARE DOWNLOADS

Go Beta Archivé

Voici les résultats pour votre recherche:

Flash Memory    
 
Version 2.09
Released 10/22/08

Works with:
Spider Jam

Firmware v2.09 Release Notes:

  • Eliminated slight delay when entering Record mode.
  • Fixed problem with extended-ascii characters in file names.
  • Fixed Undo issue for recordings loaded directly from SD-Card, where the last two overdubs would be erased instead of only the most recent one.
v2.09 Firmware Update Instructions:
  • After you download the v2.09 update to your computer, please click here for step by step instructions on how to install the update. (Instructions are for v2.07, but they are essentially the same for v2.09. Note: If you are updating from v2.07, you can skip Step 4 -- no need to power up your Spider Jam with the SD card inserted -- simply insert SD card with power on as described in Step 3, then proceed to Step 5).
Spider Jam Advanced Guide:
  • For in-depth info on features and functionality of the Spider Jam not included in the Pilot's Handbook, check out the Spider Jam Advanced Guide here.
WARNING: BACK UP YOUR FILES!
  • The v2.09 update will erase all the internal recordings you have made. If you want to save them, use an SD card to create backups (via the TRANSFER ALL TO CARD command) then copy them from your SD card onto your PC for safe keeping (using an SD card reader). You can then reload your files using an SD card at any time after you�ve completed the update.

  • Note: If you are updating from v1.04, you should back up your recordings by connecting a recording device to your Spider Jam RCA Outputs (tape or hard disk recorder, computer sound card, etc.) then record them as you would any other recorded material in real time. (Tip: Record them in WAV format at 44.1, 16 bit mono; that way you can reload them into your Spider Jam later).

OS: Windows XP, Mac OS X, Windows Vista, Windows 7, Windows 8
( 331.84 MB ) Get Download


Flash Memory    
 
Version 2.07
Released 9/30/08

Works with:
Spider Jam

The v2.07 firmware update adds SD Card functionality to Spider Jam, plus other new features.

v2.07 Firmware Update Instructions:

  • After you download the v2.07 update to your computer, please click here for step by step instructions on how to properly update your Spider Jam to version 2.07.

Spider Jam Advanced Guide:
  • For in-depth info on the new features of the v2.07 update, as well as other info not included in the Pilot's Handbook, check out the Spider Jam Advanced Guide here.

WARNING: BACK UP YOUR FILES!
  • The v2.07 update will erase all the internal recordings you have made in your Spider Jam. If you want to save them, you should first back them up by connecting a recording device to your Spider Jam RCA Outputs (tape or hard disk recorder, computer sound card, etc.) then record them as you would any other recorded material in real time. (Tip: Record them in WAV format at 44.1, 16 bit mono; that way you can reload them into your Spider Jam later).

OS: Windows XP, Mac OS X, Mac OS Tiger, Windows Vista, Mac OS Leopard
( 331.84 MB ) Get Download


Flash Memory    
 
Version 1.04
Released 2/27/08

Works with:
Spider Jam

This is the original Flash Memory version included with Spider Jam.

Warning: Updating your Flash Memory will erase all recordings and patches saved on your Spider Jam and return all settings to factory defaults.

In order to update your Spider Jam you will need a 2gig or less SD card* formatted to FAT16.

Instructions for updating Spider Jam:

  1. Download the firmware file to your computer.
  2. Copy the firmware file ( fw.bin ) to the root directory or your SD Card.
  3. Insert the SD card into Spider Jam (the slot is in the back of the amp).
  4. Switch Spider Jam on while holding the Save button. Spider Jam will automatically update your firmware with the version on the SD card.
  5. The update will take several minutes. Spider Jam will reboot once the update is complete.

*SDHC is not supported

OS: Windows XP, Mac OS X, Mac OS Tiger, Windows Vista
( 331.55 MB ) Get Download


RECENT UPDATES

La V2.1 du firmware de l’AMPLIFi vous permet d’enregistrer

La V2.1 du firmware transforme votre AMPLIFi 150, 75 ou FX100 en une interface USB compatible nativement avec votre Mac, PC ou dispositif iOS*. C’est une mise à jour indispensable pour le travail avec GarageBand®, Cubase®, Pro Tools®, Logic®, Ableton® Live, Cakewalk® et autres logiciels d’enregistrement audio.

La V2.1 du firmware de l’AMPLIFi vous permet d’enregistrer
Lisez plus

Système V1.2 pour StageScape M20d

Optimisez la sonorisation de vos concerts avec le nouveau système V1.2 proposant des pages de faders ainsi que des presets d’effets créés par des ingénieurs du son au sommet de leur art.

Système V1.2 pour StageScape M20d
Lisez plus

Mise à jour Variax HD gratuite

Variax HD présente une collection d'instruments HD incroyables pour toute les guitares James Tyler Variax. Et avec le logiciel Workbench HD, vous pouvez créer toute les guitares que vous souhaitez.

Mise à jour Variax HD gratuite
Lisez plus

Line 6 Monkey

Monkey keeps your Line 6 gear up-to-date with the latest drivers and software updates

Free Download

License Manager

Authorize and manage your purchased Line 6 Licenses.

Free Download