Clip Safe is a magical lifeline for distorted takes – a
red-eye tool for recorded audio. Clip Safe records your take on two
channels, one at a lower volume. If your recording clips, it lets you
substitute it for the other one. Don't ask us how it works, it just
Just a button-tap away, Reason Essentials' Recording Meter lets you tune your guitar and set the levels from across the room.
||All the inputs you'll ever need. And then some.
On the back of Balance you'll find inputs for all your
gear: two microphone preamps with phantom power, high impedance guitar
and bass inputs with pads, and four line inputs.
Hardware input source selection
With Balance your instruments are always connected and
you are always ready to record. Use the buttons on the front panel to
select the active inputs. We've put all the controls at your fingertips.
Record Ready LEDs
When a Reason Essentials audio channel is active and
armed for recording, the Ready LEDs light up. Just hit record and play.
The software will take care of the rest.
||Large main output and headphone level controls
On Balance the controls you reach for most often are the easiest to find.
|Output muting and Direct Monitoring
Hit the Mute button once to mute the main outs. Press and
hold the button to activate direct monitoring of the input channels,
for latency free recording or standalone use.
||Powerful headphone amplifier
No headphones are too tough for Balance's powerful
headphone amp, ensuring earshattering volumes with even the quietest of
||USB 2.0 powered
Plug and play – Balance is powered through the USB port.
On the Mac, no drivers are required. On Windows, the drivers come
pre-installed with Reason Essentials.