TonePort UX8

TonePort UX8 is no longer made.

Manuals

About TonePort UX8:
    Front Panel:
  • 8x input trim knobs, signal activity & clip LEDs
  • 8x low-cut filter switches
  • 8x pad switches
  • 2x 1/4-inch instrument input with 2x pads
  • Phantom power (48 V) buttons for mic inputs
  • Master volume knob
  • Master mute switch
  • 2x 1/4-inch stereo headphone jacks with trim knobs for monitoring different input mixes
  • 2x dB-scaled VU meters with clip LEDs (software-assignable to any input/output pair)
  • Power switch
    Rear Panel:
  • 8x XLR balanced inputs w/ mic preamps
  • 8x 1/4-inch unbalanced line level input jacks
  • 8x 1/4-inch balanced line output jacks
  • S/PDIF input and output RCA-type jacks
  • 2x 1/4-inch footswitch jacks for MIDI control of GearBox and 3rd party software
  • Expression Pedal for MIDI control of GearBox and 3rd party software
  • USB 2.0 connector
  • Internal power supply and IEC cable
    Chassis:
  • 2U metal rackmount design, 1/8-inch thick
  • Durable black matte enamel with silver silkscreen for high legibility
  • Chrome knobs, buttons and meter rings
    Software:
  • Built-in models of 18 guitar amps and 24 cabinets, 5 bass amps and 5 bass cabs, 6 studio-standard mic preamp models and 29 stompbox and studio effects
  • ToneDirect™ Monitoring of your processed signal through the UX8 provides immediate responsiveness while you record.
  • Hardware monitoring provides near zero latency
  • Recording flexibility – monitor any pair of processed signals while sending either amp and effects, amp only, or completely dry signal to your recording software for later processing and effects bussing
  • Special TonePort UX8 software mixer provides cue-mix monitoring of up to 4 stereo pairs, ideal for live tracking
    AD Conversion:
  • 16 bit and 24 bit
  • 44.1, 48, 88.2 and 96 kHz
  • Impedance: 50 Ω
    Measurements:
  • Max Input Level: 18.5 dBu
  • 12 dB more dynamic range for recording guitar than any similar interface
  • Frequency Response: 20 Hz to 40 kHz +/-0.5 dB
  • EIN: -125 dB A-weighted
TonePort UX8 Ins and Outs:
    Mic:
  • 8x XLR rear panel balanced inputs with mic preamps
  • 8x front panel trim knobs
  • 8x 75 Hz low-cut filter switches
  • 8x -20 dB pad switches
  • +48 V phantom power
  • Impedance: 1.3 kΩ
    Instrument:
  • 2x 1/4-inch front panel High-Z inputs
  • 2x -10dB pad switches
  • Impedance: 1 MΩ
    Line:
  • 8x 1/4-inch rear panel unbalanced line level inputs
  • Impedance: 10 kΩ
    Analog Output:
  • 8x 1/4-inch rear panel balanced +4 dBu line outputs
  • Analog main volume knob and mute switch
  • Impedance: 600 Ω
  • Max Output Level: 19 dBu
  • Frequency Response: 20 Hz to 20 kHz -0.35 dB
  • THD+N: 0.005%
    Headphone Output:
  • 2x 1/4-inch stereo headphone outputs
  • 2x front panel trim knobs
  • Impedance: 50 Ω
    Digital Input/Output:
  • S/PDIF stereo I/O
  • RCA type connectors
  • 24 bit operation, up to 96 kHz
TonePort UX8 System Requirements:
    Mac:
  • Intel® or Power PC® based G4 1.5GHz or better (G4 1.67 or better recommended)
  • OS X 10.4 or better
  • Host application that supports RTAS or Audio Unit (AU) Plug-ins
  • 512MB RAM minimum (1GB or more recommended)
  • 1GB free HD space minimum (10GB or more recommended for recording)
  • Drive speed 5400rpm minimum (7200rpm or faster recommended)
  • CD-ROM drive
  • Internet connection required for activation (once activated, Internet connection is not required)
    Windows:
  • Pentium® 4 1.2GHz or better (2.5Ghz or more recommended)
  • Windows® Vista and Windows® XP (with SP2 only)
  • Host application that supports RTAS or VST Plug-ins
  • 512MB RAM minimum (1GB or more recommended)
  • 1GB free HD space minimum (10GB or more recommended for recording)
  • Drive speed 5400rpm minimum (7200rpm or faster recommended)
  • CD-ROM drive
  • Internet connection required for activation (once activated, Internet connection is not required)
    USB:
  • One free USB 1.1 or 2.0 compatible port on computer (USB hubs are not supported)
POD Farm 2* Platinum includes:
  • 78 immortal guitar amps
  • 24 historic guitar cabs
  • 28 thumping bass amps
  • 22 thunderous bass cabs
  • 97 essential stompbox and studio effects
  • 6 must-have mic preamps
  • Dual Tone capability
* This version of POD Farm contains a Line 6 license that is not compatible with an iLok device. Your Line 6 hardware must be connected to your computer via USB in order to authorize and use the POD Farm software. More information on iLok-compatible POD Farm can be found here.