Dr. Distorto

Dr. Distorto are no longer made.

Please check out these replacement products:

Manuals:

Other Languages
ToneCore Dr. Distorto Features:
    FEEDBACK/SUSTAINER CONTROLS
    FDBK - The feedback switch is used to configure Dr. Distorto's unique harmonic sustainer circuit.
    • Off - This disables the feedback portion of the pedal, leaving Rise, Fall and Blend non-functional. This setting is great for using Dr. Distorto as a distortion box only.
    • Sustain - Provides a sustained tone that will be in unison with any single note played.
    • Octave - Provides a sustained tone that is one octave above any single note played.
    Rise - Adjusts the amount of time it takes the feedbacker to begin sustaining a tone.
    Fall - Adjusts the amount time it takes the feedbacker to stop sustaining a tone.
    Blend - Adjusts the volume of the feedbacker's sustained tone.

    DISTORTION CONTROLS
    Level - The Level knob controls the output level of the pedal. It does not affect the pedal's tone or FX section in any other way.
    Drive - The Drive knob dials in the amount of distortion created by the pedal. Use this with the tone knob to dial in the perfect overdriven tone.
    Tone - The Tone knob allows you to smoothly morph from a fuzz distortion tone to a classic drive tone using only one dial.
    Gate - The Gate switch is used to reduce signal noise, hum, and hiss when you are not playing.
    • Off - Disables the gate function completely.
    • Mild - A soft gate, when minimal noise attenuation is needed. The gate's threshold is linked to the Drive knob for best results at any setting.
    • Clamp - A hard, clamping gate with a quick response to cut out all noise between notes. The gate's threshold is linked to the Drive knob for best results at any setting.
ToneCore Dr. Distorto Specs:
  • Single 9-Volt Battery, or
  • Line 6 DC-1G 9-Volt DC Power Supply (buy it now)
  • Width 3.375"
  • Depth 5.625"
  • Height 2.875"
  • Weight 2lbs 4oz