Valid product registration or software purchase required to use CustomTone.

TONE NAME: WORSHIPSTRAT

  • Created with: POD HD500
  • Author:
  • Amp:
    PhD Motorway
  • Style:
    Worship
  • Date: 3/28/16
  • Downloads: 2479
  • Addons:

    Model Packs increase the number of Amp or FX Models of a GuitarPort, TonePort, PODxt, PODxt Live or PODxt Pro, for a wider variety of tone possibilities. When a particular tone in the library relies on a Model available in one of these packs, you'll see symbol(s) to indicate which Packs: MS (Metal Shop), CC (Classics Collection), FX (FX Junkie), and PP (Power Pack).

    The models within the FX Junkie Model Pack are already included in PODxt Live, and offered for purchase to add-on to GuitarPort, TonePort, PODxt and PODxt Pro.

    Variax is the uniquely flexibile guitar from Line 6. Our Vetta II amplifier includes a digital connection for the Variax that lets you store settings for both your amp and your guitar in the Vetta II so that when you call up a Vetta Channel Memory your amp and guitar can change sounds together. Vetta II Tones marked with this guitar symbol include this Variax data.

    For each tone in the library, you'll see an icon for either a single coil or humbucker pickup. This tells you whether the tone is best for use with a single coil pickup or a humbucker, so you can select the appropriate pickup on your guitar when using this tone.

    Attention POD 2.0, Flextone and HD147 owners... Your hardware doesn't do Stomp effects, so you'll hear something different than what was intended. Try increasing the Drive or choose a higher gain Amp Model to get the right sound. The other aspects of the sound should translate as expected, so you'll at least get a great starting place for tweaking.

  • Comments:
    This tone is based on the Dr.Z (PhD Motorway) amp set to clean for playing along a vintage Strat with low output pickups so if your guitar has humbuckers or just hot pickups feel free to change the Gain/Volume settings on the amp, compressor and overdrive pedals. I use a BoostComp to add some girth and a bit of compression while still keeping it dynamic enough so cleans up if you play lightly. After that I add a Screamer which acts as the main overdrive. FS3 has the FX Loops assigned to it and it ONLY works if you have a jumper cable between "FX Return" and "FX Send", if so it acts as a boost with 6db of gain. A Noise Gate is used but if your guitar is quiet enough you can remove it in favor of another FX. The amp's volume parameter is assigned to EXP2 (works as Volume pedal). We have 1/4 and a 1/8d delays that you can change to taste (F6, F7). FS8 has (2) Reverbs assigned to it and stomping on it will toggle between a standard Hall Reverb and the Particle Reverb which creates a lot of ambience and has EXP2 assigned to the mix parameter where the highest setting is at the heel position and the lowest at toe to make it easier to change between EXP1 and EXP2 (Volume to Reverb Mix) and keep the change from feeling abrupt, allowing you to bring the reverbs up or down gradually.

Tone successfully deleted

 
Delete this tone forever?

Yes / No
There was a problem deleting the tone.

Close

Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.